Soler & Palau has been producing quality, environmentally sustainable ventilation products and systems for over 50 years. Our products deliver exceptional performance and energy efficiency, while reducing the impact on the environment. S&P is dedicated to air quality and providing suitable solutions for your ventilation needs.
A policy that is not respectful of the environment would be incompatible with the S&P philosophy. Our future vocation implicates us deeply in the legacy that we are going to leave to our children. S&P (Spain) is the only company of the sector ISO-14001 certified by the Environmental Management: for that the emitted gases are seeped/filtered and all the liquid or solid wastes that are generated in the productive processes are recycled, to proceed to its subsequent use.
S&P's LPD, TD, TR, PV and SWF can be used by builders to earn points toward National Green Building Certification. The following points can be potentially earned for each product:
Model LPD Low Profile Direct Drive Centrifugal Roof/Sidewall Exhauster
18 points, plus the mandatory ventilation of all bathrooms to the outdoors
Model eRED- Centrifugal Exhauster with Electronically Commutated Motor
The eRED comes with S&P’s electronically commutated motor (eMotor) which offers the energy efficiency of a DC motor with the ease of maintenance of DD motors. The eMotor provides the benefit of a fully controllable motor which can be controlled by a PC or building management system. The eRED is ideally suited to solve ventilation challenges in multi-story buildings. When used with one of S&P’s constant pressure controls this fan model provides an energy efficient answer to venting dryers, bathrooms and kitchens in hotels, high rise buildings, institutional facilities and dormitories.
Our new Continuous Ventilation Controls (CVC) are an efficient, cost effective way to achieve ASHRAE 62.2 continuous ventilation standard. S&P’s CVC allow a new or existing bath fan to run continuously on a low speed. In conjunction with an S&P TD fan a CVC will immediately improve the air quality in the home and reduce the damaging effects of moisture and mold. In areas where ASHRAE 62.2 is not a requirement the CVC is still an economical choice to improve indoor air quality.
Model TRC- ERVs for Commercial Applications
S&P’s TRCs moderate extremes in both temperature and humidity, creating a comfortable indoor environment. The unique moisture transfer capability of the S&P core also eliminates condensation and frost build up in most applications. Unlike other ERVs on the market no mechanical or electrical defrost systems are needed, which means higher heat recovery efficiencies, easier installation and more reliable operation.
Documentation
Brochure
IAQ & ASHRAE 62.2 Solutions
Definition
ASHRAE 62.2 applies to all residential spaces that are “intended for human occupancy” in single family homes and multi-family structures up to three stories. These spaces include living rooms, bedrooms, kitchens, bathrooms, hallways, closets, store rooms, laundry rooms, garages, and basements.
Requirements
Whole Building Ventilation Requirement
Local Exhaust Requirement
Required ventilation is based on the size of the house and number of expected occupants.
Kitchens: 100 CFM intermittent or 5 ACH continuous (based on kitchen volume)
Bathrooms: 50 CFM intermittent or 20 CFM continuous
4 Solutions from S&P
Whole Building Ventilation Requirement
Local Exhaust Requirement
1. The BEST Solution
3. A GOOD Solution
Model TD-MIXVENT with CVC
Inline Mixed Flow Fan with Continuous Ventilation Control
Model TD-MIXVENT
Inline Mixed Flow Fan
2. A BETTER Solution
4. The ULTIMATE Solution
Model TD-MIXVENT with V-SWITCH
Inline Mixed Flow Fan with Line Voltage Control
Model TR
Total Recovery for ALL Climates - The Ultimate ERV
